Quick answer: Professional paver sealing usually costs $1.50 to $3.25 per square foot, according to HomeGuide’s 2026 cost data. That price typically includes pressure cleaning, refilling the joint sand and applying the sealer. For a 500 sq ft patio, that’s roughly $875 to $1,475. For a 1,000 sq ft driveway, it’s roughly $1,750 to $2,950. Bigger jobs cost less per square foot, and pavers that need extra work, like rust removal or stripping old sealer, cost more.
These are published averages, not a quote. The exact cost for your Lake Worth home depends on the size, the condition of your pavers and what’s included. Below, we explain why paver sealing quotes vary so much, what changes the price here in Palm Beach County, what sealing really costs per year, and what a fair written quote should include.
Paver Sealing Cost per Square Foot by Job Size
Paver sealing is priced by the square foot, and the rate drops as the job gets bigger. Setup, travel and equipment cost about the same whether the job is large or small, so small jobs carry a higher rate.
|
Job size |
Price per sq ft |
Example total |
|---|---|---|
|
Small (under 500 sq ft) |
$2.20 to $3.25 |
100 sq ft: $220 to $325 |
|
Medium (501 to 2,000 sq ft) |
$1.75 to $2.95 |
1,000 sq ft: $1,750 to $2,950 |
|
Large (over 2,000 sq ft) |
$1.50 to $2.20 |
3,000 sq ft: $4,500 to $6,600 |
You may also see a lower number elsewhere. Agni puts the national average to clean and seal pavers at about $400, with most projects between $300 and $550 and a typical rate of $1 to $3 per square foot. That average includes many small patios, which is why it looks lower. For a full driveway or pool deck, the size-based numbers above are the better guide.
Why Paver Sealing Cost Matters in Lake Worth
In South Florida, paver sealing isn’t a one-time expense. Sun, heavy rain and constant humidity wear sealer down, so most pavers here need resealing every 2 to 3 years. That makes it worth understanding the price before you book, because you’ll likely pay it more than once.
Timing affects cost, too. According to the National Weather Service, about 69% of South Florida’s yearly rain falls in the wet season, which typically runs from late May to mid-October. Rain on fresh sealer is one of the most common reasons a job has to be redone. That’s why many homeowners book in the dry season. Our guide on when and how often to seal pavers in Lake Worth
Why Paver Sealing Quotes Vary So Much
Published Florida prices range from under $1 to more than $3 per square foot. That’s a big gap, and it usually comes down to one thing: the quotes aren’t for the same job. Two companies can both say “paver sealing” and mean very different work.
|
What’s included |
Why it matters |
What to ask |
|---|---|---|
|
Cleaning before sealing |
Sealer locks in whatever is on the surface, including dirt, algae, rust and efflorescence |
“How do you clean, and is it included?” |
|
Joint sand refill |
Washed-out joints let weeds and ants in and let pavers shift |
“Is joint sand included, and what type?” |
|
Sealer type |
Water-based and solvent-based sealers cost and perform differently |
“What brand and type of sealer will you use?” |
|
Number of coats |
One thin coat costs less but may not last as long |
“How many coats are included?” |
|
Drying time |
Pavers must be fully dry before sealing, or the sealer can cloud |
“How long do you wait after cleaning?” |
|
Old sealer removal |
Failed sealer may need to be stripped first |
“Does my old sealer need to come off, and what does that cost?” |
The sealer itself makes a difference. Angi lists professional application at about $1.50 to $2 per square foot for solvent-based sealer and $2.25 to $3.75 for water-based sealer. Neither is right for every home. Ask which one a company recommends for your pavers and why.
A low quote isn’t automatically a bad deal, but if it’s far below everyone else’s, check which of these steps it leaves out.
Local Factors That Change the Cost in Lake Worth
A few things common in Lake Worth and the rest of Palm Beach County can raise or lower your price:
Rust stains from well water. Many local irrigation systems run on well water, which leaves orange rust stains on pavers. Those need to come off before sealing, or they get sealed in. Rust removal is usually priced as an extra.
Old or failed sealer. If your pavers were sealed years ago and the sealer is peeling, cloudy or patchy, it may need to be stripped first. That’s extra labor. Resealing on schedule, before the old sealer fails, usually avoids this cost.
Shade and algae. Older neighborhoods like Parrot Cove, College Park and the Old Town area have mature trees. Shaded pavers grow more algae and mildew, so they may need a deeper clean before sealing.
Pool decks. Pool decks often need a low-gloss or anti-slip finish for safety. Natural stone like travertine and limestone also costs more to clean. Angi lists those at $3 or more per square foot.
Homes near the water. Homes closer to the Intracoastal and the Lake Worth Lagoon deal with more humidity, which affects drying time and which sealer works best.
HOA rules. If you live in an HOA community, which is common in the 33449 area, check its appearance rules. If yours limits driveway finish or color, a glossy or color-enhancing sealer may not be allowed.
How to Estimate Your Own Paver Sealing Cost
You can get a rough number before anyone comes out:
-
Measure each paved area. Multiply length by width. A 20 ft × 30 ft driveway is 600 sq ft.
-
Add the areas together. Add a 4 ft × 25 ft walkway (100 sq ft) and the total is 700 sq ft.
-
Multiply by the rate for that size. At HomeGuide’s medium-job rate of $1.75 to $2.95, 700 sq ft comes to roughly $1,225 to $2,065.
-
Add any extras. Rust removal, stripping old sealer or repairs will raise the total.
This is only an estimate. A company that sees your pavers in person can give you a firm number.
What Paver Sealing Really Costs per Year
Since sealing needs to be redone, the most useful number isn’t the one-time price. It’s the cost per year.
Take a 500 sq ft patio at $875 to $1,475. If it’s resealed every 2 to 3 years, that’s roughly $290 to $740 per year. For a 1,000 sq ft driveway at $1,750 to $2,950, it’s roughly $580 to $1,475 per year.
A sealer that lasts longer can cost less per year even if the upfront price is higher. That’s why it’s worth asking how long a company expects its sealer to last on your pavers, not just what it costs today.
Common Issues That Raise the Cost of Paver Sealing
The most expensive paver sealing job is the one you pay for twice. These are the usual reasons that happens:
-
Rain right after sealing. Water trapped in fresh sealer can leave white spots or a cloudy look. Fixing it may mean stripping and resealing.
-
Sealing damp pavers. Causes the same cloudy problem, even without rain.
-
Sealing over stains. Rust, oil and efflorescence get locked under the sealer and are much harder to remove afterward.
-
Skipping the joint sand. Joints wash out faster, weeds return, and the job needs attention sooner.
Each of these comes down to prep and timing. A company that takes its time on both is usually the better value, even at a higher price.
Is It Cheaper to Seal Pavers Yourself?
The materials cost less. HomeGuide lists water-based sealer at about $42 to $70 per gallon and solvent-based at $32 to $55. But how far a gallon goes depends on the product and how porous your pavers are, so check the label.
The real cost of DIY is everything else: cleaning equipment, joint sand, a full weekend or more of work, and getting the weather right. If the sealer goes on damp or rain hits it, the fix can cost more than hiring a professional in the first place.
How to Choose a Paver Sealing Company in Lake Worth
Before you sign anything, make sure the written quote lists:
-
The total square footage being sealed
-
The cleaning method and whether it’s included
-
Whether joint sand is included
-
The sealer brand, type, finish and number of coats
-
Any extras (rust removal, stripping, repairs) as separate line items
-
What happens if rain is in the forecast on your scheduled day
It’s also fair to ask whether the company is licensed and insured, and to see before-and-after photos of local jobs. A company that won’t put these details in writing is harder to hold to its quote.
Why Lake Worth Homeowners Choose Dan Ryan’s Pressure Cleaning
Dan Ryan’s Pressure Cleaning and Window Cleaning is a family-owned company based in Lake Worth, serving local homeowners since 2012. We handle the cleaning and the sealing ourselves, so you don’t have to coordinate two companies or wait while freshly cleaned pavers get dirty again.
We know the local issues that affect price, from rust stains caused by well water to shaded pavers and pool decks. We’ll tell you up front what your pavers need. Learn more about our paver cleaning and sealing in Lake Worth, our paver cleaning service, or our paver sealing service across Palm Beach County. For other exterior cleaning prices, see our pressure washing cost guide.
Frequently Asked Questions
How much does it cost to seal pavers? Most professional paver sealing costs $1.50 to $3.25 per square foot, including cleaning, joint sand and sealer, according to HomeGuide. A 500 sq ft patio typically runs $875 to $1,475, and a 1,000 sq ft driveway $1,750 to $2,950.
What is the paver sealing cost per square foot in Florida? Published Florida prices range from under $1 to about $3 per square foot, and HomeGuide puts a full job (cleaning, joint sand and sealer) at $1.50 to $3.25. Small jobs cost more per square foot and large jobs cost less. The exact rate depends on what’s included.
Why are some paver sealing quotes so much lower? Usually because they leave out steps, such as a thorough cleaning, joint sand, a second coat or proper drying time. Compare what each quote includes, not just the price.
Is paver sealing worth the cost in Florida? For most driveways, patios and pool decks, yes. Sealing helps protect color from the sun, makes stains easier to clean and holds joint sand in place during heavy rain. It does need to be redone every 2 to 3 years, so factor that into the cost.
How can I lower the cost of paver sealing? Have the cleaning and sealing done in one visit, reseal before the old sealer fails so it doesn’t need stripping, measure your area accurately, and book in the dry season to avoid rain delays and redo costs.
Do you serve areas near Lake Worth? Yes. Along with Lake Worth, we serve Boca Raton, Boynton Beach, Delray Beach, Greenacres, Jupiter, Palm Beach, Palm Beach Gardens, Parkland, Royal Palm Beach, Wellington, West Palm Beach and nearby areas.
Get an Exact Price for Your Pavers
Published price ranges are a good starting point, but the only way to know your real cost is a quote based on your actual pavers. If you’re in Lake Worth or anywhere in Palm Beach County, Dan Ryan’s Pressure Cleaning and Window Cleaning will look at your driveway, patio or pool deck and give you a clear, written price. First-time clients get up to $100 off their service. Get your free quote today.